A new effective on chip electromembrane extraction coupled with high performance liquid chromatography for enhancement of extraction efficiency

In the present research, an effective on chip electromembrane extraction (CEME) coupled with high performance liquid chromatography was presented for analysis of nortriptyline (NOR) and amitriptyline (AMI) as basic model analytes from urine samples. The chip consists of two polymethyl methacrylate (PMMA) parts with two craved microfluidic channels in each part. These channels were used as flow path for the sample solution and a thin compartment for the acceptor phase. A porous polypropylene sheet membrane impregnated with an organic solvent was placed between two parts of chip device to separate the channels. Two platinum electrodes were mounted at the bottom of these channels that were connected to a power supply providing the electrical driving force for migration of ionized analytes from sample solution through the porous sheet membrane into the acceptor phase. This new setup provides effective and reproducible extractions with low volume of sample solution. Efficient parameters on CEME of the model analytes were optimized using one variable at a time method. Under the optimized conditions, the calibration curve was linear in the range of 10.0–500 μg L⁻¹ with coefficient of determination (r²) more than 0.9902. The relative standard deviations (RSDs %) for extraction and determination of the analytes were less than 6.8% based on six replicate measurements. LODs less than 4.0 μg L⁻¹ were obtained for both of the model analytes. The preconcentration factors higher than 17.0-fold were obtained. The results demonstrated that CEME would be used efficiently for extraction and determination of AMI and NOR from urine samples.     

Poly(N-vinylimidazole/ethylene glycol dimethacrylate) for the purification and isolation of phenolic acids

In this study we report the novel polymeric resin poly(N-vinyl imidazole/ethylene glycol dimethacrylate) for the purification and isolation of phenolic acids. The monomer to crosslinker ratio and the porogen composition were optimized for isolating phenolic acids diluted in acetonitrile at normal phase chromatography conditions, first. Acetonitrile serves as polar, aprotic solvent, dissolving phenolic acids but not interrupting interactions with the stationary phase due to the approved Hansen solubility parameters. The optimized resin demonstrated high loading capacities and adsorption abilities particularly for phenolic acids in both, acetonitrile and aqueous solutions. The adsorption behavior of aqueous standards can be attributed to ion exchange effects due to electrostatic interactions between protonated imidazole residues and deprotonated phenolic acids. Furthermore, adsorption experiments and subsequent curve fittings provide information of maximum loading capacities of single standards according to the Langmuir adsorption model. Recovery studies of the optimized polymer in the normal-phase and ion-exchange mode illustrate the powerful isolation properties for phenolic acids and are comparable or even better than typical, commercially available solid phase extraction materials. In order to prove the applicability, a highly complex extract of rosemary leaves was purified by poly(N-vinyl imidazole/ethylene glycol dimethacrylate) and the isolated compounds were identified using UHPLC–qTOF-MS.     

Carboxylated graphene oxide/polyvinyl chloride as solid-phase extraction sorbent combined with ion chromatography for the determination of sulfonamides in cosmetics

A carboxylated graphene oxide/polyvinyl chloride (CGO/PVC) material was prepared as a sorbent for the selective extraction of sulphonamides from complex sample. After being dispersed in buffer solution, sample was transferred into the prefabricated solid-phase extraction (SPE) column, which integrated extraction and cleanup into one single-step. A multi-response optimization based on the Box-Behnken design was used to optimize factors affecting extraction efficiency. Compared with the commonly commercial sorbents including MCX, WCX and C₁₈, CGO/PVC hybrid material had higher extraction selectivity and capacity to sulphonamides. The limits of detection and quantification for seven target compounds were in the range of 3.4–7.1 μg/L and 11.4–23.7 μg/L, respectively. The self-assembly SPE cartridge was successfully used to enrich seven analytes in anti-acne cosmetics prior to ion chromatography detection with good recoveries of 87.8–102.0% and relative standard deviations of 1.2–6.4%, implying that this method was suitable for routine analysis of cosmetics.     

Fluorescent determination of graphene quantum dots in water samples

This work presents a simple, fast and sensitive method for the preconcentration and quantification of graphene quantum dots (GQDs) in aqueous samples. GQDs are considered an object of analysis (analyte) not an analytical tool which is the most frequent situation in Analytical Nanoscience and Nanotechnology. This approach is based on the preconcentration of graphene quantum dots on an anion exchange sorbent by solid phase extraction and their subsequent elution prior fluorimetric analysis of the solution containing graphene quantum dots. Parameters of the extraction procedure such as sample volume, type of solvent, sample pH, sample flow rate and elution conditions were investigated in order to achieve extraction efficiency. The limits of detection and quantification were 7.5 μg L⁻¹ and 25 μg L⁻¹, respectively. The precision for 200 μg L⁻¹, expressed as %RSD, was 2.8%. Recoveries percentages between 86.9 and 103.9% were obtained for two different concentration levels. Interferences from other nanoparticles were studied and no significant changes were observed at the concentration levels tested. Consequently, the optimized procedure has great potential to be applied to the determination of graphene quantum dots at trace levels in drinking and environmental waters.     

Humic acids as both matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and adsorbent for magnetic solid phase extraction

In the present study, humic acids (HAs) were applied as both a matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and an adsorbent of magnetic solid phase extraction (MSPE) for the first time. As natural macromolecule compounds, HAs are inherently highly functionalized and contain laser energy absorbing–transferring aromatic structures. This special molecular structure made HAs a good candidate for use as a MALDI matrix in small molecule analysis. At the same time, due to its good adsorption ability, HAs was prepared as MSPE adsorbent via a simple co-mixing method, in which the commercially available HAs were directly mixed with Fe₃O₄ magnetic nanoparticles (MNPs) in a mortar and grinded evenly and completely. In this process, MNPs were physically wrapped and adhered to tiny HAs leading to the formation of magnetic HAs (MHAs). To verify the bi-function of the MHAs, Rhodamine B (RdB) was chosen as model compound. Our results show that the combination of MHAs-based MSPE and MALDI-TOF-MS can provide a rapid and sensitive method for the determination of RdB in chili oil. The whole analytical procedure could be completed within 30 min for simultaneous determination of more than 20 samples, and the limit of quantitation for RdB was found to be 0.02 μg/g. The recoveries in chili oil were in the range 73.8–81.5% with the RSDs less than 21.3% (intraday) and 20.3% (interday). The proposed strategy has potential applications for high-throughput analysis of small molecules in complex samples.     

Fabrication of the Monolithic Fiber for the Solid Phase Micro‐extraction of Malachite Green

A monolithic fiber of molecularly imprinted polymer (MIP) was prepared by in situ polymerization within the capillary with an inner diameter of 530 µm. It was carried out in 8 min by microwave irradiation using malachite green (MG) as a template molecule, α‐methacrylic acid (MAA) as a functional monomer, acetonitrile (ACN) as a porogenic solvent, ethylene dimethacrylate (EDMA) as a crosslinker, azodiiso‐butyronitrile (AIBN) as a thermal initiator. The resulted MIP fibers were pushed out from the capillary, eluted and inserted in the capillary again, which successfully used for the solid phase microextraction (SPME) procedure. The factors affecting the extraction of MG, such as the molar ratio of template/monomer (MG/MAA), concentration of NaCl, extraction and desorption time, and extraction and desorption solvents were investigated in detail. The selectivity of the MIP fibers was compared using MG analogues crystal violet (CV) and non‐analogue Sudan II. It was also employed for the pretreatment of trace MG in the fish feed followed by high‐performance liquid chromatography (HPLC) detection. Under the optimal conditions, the linear range of MG was 10‐600 μg/L, the detection limit (LOD) was 1.23 μg/L and the recovery of spiked fish feed sample was 88.7～113.9%.     

基于愈创木酚荧光减量准确测定过氧化物酶活性的新方法

利用H2O2/过氧化物酶(POD)/愈创木酚(GA)反应体系的产物(470 nm)吸光度去定量POD活性是目前常用方法之一,但产物不稳定且对比色皿有吸附现象是该反应的主要缺点之一。为了解决此问题,本研究利用GA的荧光特性建立了一种能准确测定POD活性的方法。用辣根过氧化物酶( HRP)作为测试样品得到了以下优化条件：0.5 mmol/L GA,0.5 mmol/L H2O2,0.05 mol/L PBS缓冲液(pH 6.0),反应温度20℃,样品耗量20μL;本方法的线性范围为500~60000 U/L(r=0.9993),RSD≤2.4%(n=11),检出限为385 U/L。在优化条件下,用白萝卜提取液作为测试样品,用本方法((9714依132) U/L)与比色法((9926依352) U/L)和循环催化流动分析法((9608依456) U/L)进行了对比,结果表明,3种方法相互一致性很好。     

离子液体自聚集磁性多壁碳纳米管固相萃取环境水样中的磺胺类药物

将1-己基-3-甲基咪唑六氟磷酸([C6MIM] [PF6])离子液体自聚集于磁性多壁碳纳米管(Fe3O4@MWCNTs)表面,并将其作为磁性固相吸附剂,建立了同时测定环境水样中磺胺二甲嘧啶、磺胺对甲氧嘧啶、磺胺邻二甲氧嘧啶和磺胺二甲异噁唑4种磺胺类药物的涡旋辅助磁性固相萃取-高效液相色谱法.优化条件为:将20.0 mg [C6MIM] [PF6]包覆的Fe3 O4@MWCNTs分散于200 mL水样中,涡旋萃取15 min,磁性分离获取磁性吸附剂,3.5 mL 1.0％乙酸铵-甲醇溶液洗脱,洗脱液氮吹至干,300 μL甲醇溶解后待下一步高效液相色谱/二极管阵列检测器(HPLC-PDA)分析.4种磺胺类药物在0.375 ～ 75.0 μg/L范围内与峰面积呈良好的线性关系,其相关系数为0.9985 ～0.9996,检出限(S/N=3)为0.079 ～0.099 μg/L,3个加标浓度水平的回收率为80.60％ ～99.99％,日内、日间测定的相对标准偏差分别为1.3％ ～6.9％和1.2％～2.9％(n=3).结果表明,本方法简单方便,易于操作,适用于环境水样中痕量磺胺类药物的检测.     

Preparation of a new Cu(II)-imprinted polymer and its application for the determination of trace copper in water samples by flame atomic absorption spectrometry

A new Cu(II)-imprinted polymer has been prepared for selective solid-phase extraction of Cu(II) prior to its determination by flame atomic absorption spectrometry. Two functional monomers, 4-(methacryloylamino)benzamide and 4-vinylpyridine, formed a complex with Cu(II) ion through coordination interactions. The self-assembled Cu(II)-monomer complex was copolymerised via bulk polymerisation method in the presence of ethyleneglycoldimethacrylate cross-linker. In order to remove Cu(II) ions, the resulting polymer was washed with 1.0 M HNO₃ and then with water until obtaining a neutral pH. The ion imprinted polymer was characterised by Fourier transform infrared. The experimental conditions were optimised for solid-phase extraction of Cu(II) using a column of ion-imprinted polymer (IIP). Quantitative retention was achieved between pH 5.0 and 7.0, whereas the maximum recovery for the non-imprinted polymer (NIP) was about 74% at pH 7.0. The IIP showed higher selectivity to Cu(II) in comparison to the NIP. The IIP also exhibited excellent selectivity for Cu(II) in the presence of other metal ions. The relative standard deviation and limit of detection (3s) of the method were 1.6% and 1.8 µg L^?1, respectively. The method was verified by analysis of two certified reference materials (CWW-TM-D and SRM 3280) and then applied to the determination of Cu(II) in seawater and lake water samples and haemodialysis concentrates.     

Microwave-assisted micro-solid-phase extraction for analysis of tetracycline antibiotics in environmental samples

In this study, a novel solid-liquid-solid extraction approach, which was termed ‘microwave-assisted micro-solid-phase extraction’ (MAE-μ-SPE), was developed. Target analytes were extracted from the sample into extraction solvent enhanced by microwave field, following adsorption by the adsorbent in the micro-solid-phase extraction device. Without any clean-up steps, the extracts were analysed by high performance liquid chromatography coupled with ultra-violet detector. The MAE-μ-SPE approach was developed for the extraction of four tetracycline antibiotics residues in environmental soil, sludge and atmospheric particulate matters. Variables affecting extraction procedures were systematically investigated. Low detection limits of 0.1–6.3 ng/g and low quantification limits of 0.33–20.7 ng/g were achieved under optimised conditions. The recoveries of antibiotics ranged from 70.6% to 110.5% with relative standard deviation of less than 15.1%. The predominance was showed when compared to conventional MAE and μ-SPE method. According to the results, MAE-μ-SPE was proved to be a simple and effective sample preparation method for the analysis of trace organic contaminants in environmental samples.